MyBidet.com

Home  ›  Choosing a bidet

Bidet Seat vs Smart Toilet: Which Is Worth It?

How adding a seat to the toilet you own compares with replacing it with a smart toilet on cost, power, repairs and seat height.

By Jason Newcomb 11 min read November 2026

The short version: For most homeowners, a bidet seat on the existing toilet is the better buy, and a smart toilet earns its price only when the toilet needs replacing anyway. Electric seats start near $300 and smart toilets with a built-in bidet near $2,500 at Kohler’s listed prices. Choose the smart toilet for automatic flushing, a one-piece look, and a single integrated purchase.

A bidet seat and a smart toilet can both give you a warm, adjustable wash. The real differences lie in what else you are buying, what your bathroom has to supply, and what happens when something stops working. If you are also considering a non-electric attachment, start with Bidet Attachment or Seat?, because this page assumes you want the electric features.

What Each One Is

A bidet seat replaces the seat on your current toilet. It mounts through the existing seat holes, takes water from the toilet’s supply line through a T-connector, and plugs into an outlet. TOTO describes its WASHLET as “an electronic bidet seat added to a separate toilet bowl.”

A smart toilet is the whole fixture. TOTO calls its NEOREST line “a complete, integrated smart toilet,” with the bidet features built in, and Kohler and American Standard sell the same idea. The old toilet comes out, and a new unit, usually one-piece, goes in with its own water and power connections.

What You Keep and What You Give Up

With a seat, you keep your bowl, your tank, and your flush handle. TOTO’s WASHLET S7A has a touchless auto open and close lid and a remote with memory for four users, and Kohler’s PureWash E930 has a motion-activated cover. Automatic flushing is the usual gap: TOTO offers it on the S7A only with an optional kit, on select TOTO toilets.

With a smart toilet, those features work as one system. The NEOREST AS spec sheet lists auto flush, a touchless lid, a warm air dryer, a heated seat, and automatic misting and cleaning of the bowl and wand. TOTO states the trade-off itself: “A separate WASHLET offers more flexibility to pair a compatible seat and toilet.”

Looks are the other honest reason to go integrated. TOTO describes the NEOREST AS as a low profile, one-piece skirted toilet, 21-3/8 inches tall overall, and Kohler says the Eir has “concealed water and power connections.” A standard seat on a tank toilet usually keeps a hose and a cord in view.

Tank-Based and Tankless Flushing

A bidet seat leaves your flush alone. The water connection simply branches off the line that fills your tank, so a tank toilet should keep flushing the way it always has.

Smart toilets are often called tankless, but the word needs care. Kohler’s Veil spec sheet says “Tankless design with direct water supply,” while TOTO’s FAQ hedges with “tankless (or hybrid) design.”

TOTO describes the NEOREST flush as a “pressure-independent electric flushing system.” Kohler lists “pump-assisted flushing” on the Eir. TOTO’s G5A Lite manual says water “is supplied to the tank for the next time it is flushed,” so a low profile does not always mean no stored water. The practical point is that these flushes run on electricity and controls.

What Each Costs at the Time of Writing

These are prices shown on manufacturer sites at the time of writing, for the toilet or seat alone, in the lowest-priced finish we saw. TOTO’s figures are the list prices shown beside the finish option. American Standard’s figures are sale prices, and the finish on each of its pages showed as sold out or unavailable, so treat this as a rough guide.

ProductTypeListed price
Kohler PureWash M300Manual seat$99.99
Kohler PureWash E580Electric seat$299.97
American Standard Advanced Clean 1.0Electric seat$430.95 sale, $663 list
Kohler PureWash E930Electric seat$1,299.97
American Standard Advanced Clean 3.0Electric seat$1,364.35 sale, $2,099 list
TOTO WASHLET S7AElectric seat$2,005
Kohler LeapSmart toilet$2,499.97
American Standard Advanced Clean 100Smart toilet$3,429.40 sale, $5,276 list
TOTO WASHLET G5A LiteSmart toilet$3,570
Kohler EirSmart toilet$7,299.97
TOTO NEOREST ASSmart toilet$9,043
Kohler Numi 2.0Smart toilet$12,999.97
TOTO NEOREST NX2Smart toilet$26,279

By our own arithmetic, the gap between Kohler’s lowest-priced electric seat and its lowest-priced smart toilet in this table is about $2,200.

There is also a middle path. Kohler’s Highline tall toilet at $418.57 plus the E580 seat comes to about $719, before labor, and American Standard has listed a chair-height toilet and bidet seat combo at $1,270, though its page showed the item as not for sale on the site.

Confirm fit before you pair any seat and bowl. Kohler describes the Highline’s tall height as 2-1/2 inches higher than Comfort Height and lists it as not ADA compliant, so check it suits the person using it.

Labor is extra either way. Kohler offers flat-fee installation, and you check availability by ZIP code. For what the job adds to your total, see What a Bidet Actually Costs, Installed.

What Installation Involves

A seat is usually a do-it-yourself job. TOTO says you can install a WASHLET yourself, provided you have a dedicated grounded outlet near the toilet and can connect the junction valve to your water line. American Standard’s tool list is a screwdriver, a supply hose, and a T-junction. Our seat installation guide walks through it, and Will a Bidet Fit My Toilet? covers bowl shape and tank clearance.

A smart toilet is a toilet replacement. American Standard rates the job “Moderate to Difficult” and recommends a professional, especially for a first toilet installation. The work includes drilling pilot holes and sealing a drain socket with a wax ring, and Kohler’s tool list adds T-bolts and shims. TOTO’s NEOREST NX2 weighs 141 pounds, so this is not a job for one person with a sore back.

Check what a quote leaves out. Kohler’s smart toilet service includes hauling away the old toilet but excludes electrical work, including “installing or moving an electrical outlet,” and moving the water supply line. Kohler’s Numi 2.0 and American Standard’s Advanced Clean 100 are both made for a 12-inch rough-in.

Power, GFCI and Dedicated Circuits

Electric seats and smart toilets ask for much the same thing. Kohler’s E930 seat and its Numi 2.0 toilet carry the same line: “Requires dedicated electrical GFCI circuit (120 V, 15 A, 60 Hz).” American Standard says its SpaLet seats need a “120V dedicated GFCI circuit.” TOTO’s NEOREST pages say “120VAC GFCI outlet required,” while its FAQ says “Circuit requirements vary by model and local code.”

Power draw overlaps as well. TOTO’s S2 seat lists 1,273 watts with a maximum of 1,428 watts, its S7A seat lists 1,290 watts with a maximum of 1,446 watts, and the NEOREST AS spec sheet gives 1,290 watts. A top seat can ask as much of your circuit as a smart toilet, so have an electrician confirm capacity for the exact model.

Cord reach matters too. TOTO’s cords are about 3.9 feet long, and its FAQ says not to use an extension cord or power strip unless the model’s instructions expressly permit it. TOTO’s spec sheets also recommend surge protection, and the NEOREST and WASHLET warranties we read exclude surge damage. Our outlet guide covers the details.

Flushing in a Power Outage

With a seat on a tank toilet, an outage costs you comfort rather than function. TOTO says, “No, the washing and seat-warming features cannot be used without electricity.” The seat is not part of the flush, so your tank toilet’s handle should work as it did before.

Smart toilets vary, and TOTO advises reading the manual in advance. Kohler’s Numi 2.0, Veil, and Eir spec sheets say the emergency flush “supports up to 100 flushes during power outage,” with touch-button activation. A Kohler Smart Toilet homeowner’s guide describes an internal battery pack, ordered through Customer Care when it needs replacing.

TOTO’s backup is mechanical, and it asks more of your body. On the NEOREST RS, you remove a side cover, open the lid, then work an orange cord and a white cord in sequence.

If the water is off, TOTO says to use a bucket of about 6 to 8 liters, which by our arithmetic is 13 to 18 pounds. If grip or bending is hard, try the routine once before you need it.

Water Pressure Minimums

This is where some smart toilets are pickier than seats, so homes with low pressure should check first. Flowing and static pressure are different measurements, and the figures below are not directly comparable. TOTO’s FAQ advises contacting a plumbing professional before installing if household pressure falls outside a model’s range.

ModelStated minimumStated maximum
TOTO S2 and S7A seats7.25 psi flowing108.75 psi static
TOTO NEOREST AS and NX27.25 psi flowing108.75 psi static
American Standard Advanced Clean 10014.5 psi flowing109 psi static
Kohler Numi (K-3901, earlier model, now discontinued)30 psi static80 psi static
Kohler Smart Toilet install guide 1411744-235 psi static80 psi static
Kohler Eir4 gpm flow rate80 psi static
Kohler Veil (K-5401)6 gpm flow rateNot stated on spec sheet

Repairs and Replacement

This is the seat’s strongest argument. If a seat fails, you still have a working toilet, and you can change the seat alone. Warranties vary: American Standard gives its Advanced Clean 3.0 seat three years, and the TOTO WASHLET manual we read gives one year.

A smart toilet’s parts are tied together. TOTO says the NEOREST top unit “cannot be transferred or installed onto a standard toilet bowl, or another NEOREST model.” It does list the bowl and top unit under separate part numbers, and it says servicing should go through an authorized representative. So ask TOTO Technical Service what a like-for-like top unit would involve before you buy.

Others differ. American Standard’s Canadian site lists an Advanced Clean 100 seat unit and bowl as separate items, which points to replacing the top alone, though it is worth confirming. Kohler lets you replace the wand’s spray tip but reserves UV lamp replacement for qualified service personnel. The warranties we read on NEOREST, Kohler smart toilets, and the Advanced Clean 100 all run three years.

Accessibility: Height, Lid and Remote

Seat height can favor a smart toilet, but check the model, since Kohler lists its Karing at standard height. The ADA Standards set 17 to 19 inches from floor to top of seat, and allow 15 to 19 inches in residential units. That makes a useful yardstick at home. TOTO states 17-1/4 inches for the NEOREST AS and 17-5/16 inches for the NX2, and marks both ADA compliant.

Kohler describes its Comfort Height models as “chair-height seating that makes sitting down and standing up easier for most adults,” though the spec text we read gave no floor-to-seat figure, so check the drawing or ask.

Measure from the floor to the top of your current seat. A bidet seat cannot do much for a low bowl, so if yours is under 17 inches and rising is hard, that favors a new bowl.

Reach and Grip

For reach and grip, the gap is narrower. An automatic lid is available on both, which helps anyone who finds bending or lifting a lid awkward. TOTO lets you turn the feature on or off.

Auto flush saves the twist back to a handle, and that remains the smart toilet’s clearest hands-free gain. Remotes matter on both, and American Standard says to mount one where “the user can reach and operate it.”

Remotes

Remotes run on batteries, so plan for a helper if small battery covers are difficult: American Standard’s uses two AAA cells and Kohler’s three AA. Our guides on limited mobility, caregiving, and grab bars go further, and anyone planning a larger remodel should read Aging-in-Place.

Decision Table

Figures come from the models discussed above, so check the exact one you are considering.

QuestionBidet seatSmart toilet
Listed priceAbout $300 to $2,000 for electric modelsAbout $2,500 to $26,000
Existing toiletStaysRemoved
InstallationOften do-it-yourselfToilet replacement, professional recommended
Power120V, grounded; often dedicated and GFCI120V, grounded; GFCI, often dedicated
Flush in an outageTank flush should work as usualBackup flush varies by model
Auto flushOptional on select pairingsCommon
Seat heightSet by your existing bowl17-1/4 inches on NEOREST AS; check others
If the bidet failsReplace the seat, keep the toiletService by manufacturer rules; parts are model-specific

Who Should Pick Which

Pick a bidet seat if your toilet is sound, its height suits you, and it fits. That covers most households, and it is what we would choose first. Your flush stays as it is, and a failure later is a smaller, cheaper problem. Our reviews of the Brondell Swash 1400 and Bio Bidet BB-2000 are good places to start.

Pick a seat on a new chair-height toilet if your current bowl is too low. You solve the height problem for a fraction of a smart toilet’s price, and you keep the freedom to change the seat. For parents aging in place, this is often the most sensible combination, and our guide for buyers over 60 goes through the details.

Pick a smart toilet if you are remodeling, the toilet is coming out anyway, and you value automatic flushing and a clean one-piece look. It also makes sense when walls are already open, because a dedicated circuit and a well-placed outlet are easier to add then. Before you commit, confirm your water pressure, read the outage procedure, and ask who services the unit in your area.

Where these figures come from Prices, specifications, and procedures come from TOTO, Kohler, and American Standard product pages, spec sheets, installation guides, and manuals. The seat-height yardstick comes from the U.S. Access Board’s ADA Standards. Your own model’s manual and local code take precedence over anything here.

Image credits, cropped and placed side by side: bidet seat photo by Saimmx, Wikimedia Commons, CC0; smart toilet photo by Cgy01, Wikimedia Commons, CC BY-SA 4.0.